Paradox
©
Fisana

Jump to content


Photo
- - - - -

P. Mexicana Jalisco spawned to hpoo


  • Please log in to reply
12 replies to this topic

#1 Deleena24

Deleena24

    Pothead

  • VIP
  • 827 posts

Posted 02 January 2019 - 02:16 PM

I spawned a 2 pints of Jalisco to my usual hpoo mix. 1 pint per 1lb bag of hpoo mix.

They colonized very quickly, I then cut the tops of the bags off, cased with 60/40 Jiffy/vermiculite, and popped em in my trusty Martha.

Pins took about 12 days, give or take, and appeared at the same time in both casings.

I plan on printing a bunch to donate to the community, I will let you all know when to ask.

Also, sorry about the picture quality. My lens is broken, and I didnt want to remove them from the Martha.

Attached Thumbnails

  • 20190102_125540.jpg
  • 20190102_125543.jpg

  • Samwise and TheArchangel like this

#2 TheArchangel

TheArchangel

    Mycophiliac

  • Free Member
  • 66 posts

Posted 02 January 2019 - 04:51 PM

Looks great.



#3 Deleena24

Deleena24

    Pothead

  • VIP
  • 827 posts

Posted 03 January 2019 - 01:52 PM

Today...

Attached Thumbnails

  • 20190103_124747.jpg
  • 20190103_124754.jpg
  • 20190103_124757.jpg
  • 20190103_124803.jpg

  • Samwise likes this

#4 AbnormalMortaL

AbnormalMortaL

    Mycophiliac

  • Free Member
  • 93 posts

Posted 03 January 2019 - 09:42 PM

What was the spawn to sub ratio for those bags?

#5 Deleena24

Deleena24

    Pothead

  • VIP
  • 827 posts

Posted 03 January 2019 - 10:02 PM

These were done at a 1 to 2 ratio rye to bulk. 1 pint per 1 lb poo bag.

Edited by Deleena24, 03 January 2019 - 10:03 PM.


#6 Deleena24

Deleena24

    Pothead

  • VIP
  • 827 posts

Posted 05 January 2019 - 06:54 PM

And today...

Attached Thumbnails

  • 20190105_142625.jpg
  • 20190105_142640.jpg

  • Samwise likes this

#7 Samwise

Samwise

    Mycophiliac

  • Free Member
  • 81 posts

Posted 05 January 2019 - 07:43 PM

Fantastic work, well done, I love these mushrooms. I have recently setup a Martha for fruiting P. mexicana and P. hoogshagenii, hoping it will give me more success than my previous FC setup.

 

Do you have a link or any information detailing your bulk substrate hpoo mix? I'd like to emulate this. I'm growing P. Mexicana 'Chicon Nindo' and I hope to take abundant prints of them to give back to the community.

 

Have you sampled these mushrooms before? I only ever hear rave reviews...enjoy! 


  • coorsmikey likes this

#8 WalkingCatfish

WalkingCatfish

    Mycophage

  • Free Member
  • 102 posts

Posted 05 January 2019 - 08:04 PM

What beauties!



#9 Deleena24

Deleena24

    Pothead

  • VIP
  • 827 posts

Posted 05 January 2019 - 09:55 PM

I usually use the 1lb bags of hpoo sub from out-grow. It's an hpoo, coir, verm, and gypsum sub. Also some other things. I asked Mike the owner, but I can't tell you specifically. Using just those ingredients in most ratios will work wonderfully as long as the hydration is right...

As for sampling, not Jalisco yet, but fresh Tampanensis blow cubensis out the water. So clean colorful and bright. Like ecstacy with dramatic visuals. I literally get these whole body orgasms that run through my whole body.
  • Samwise likes this

#10 Deleena24

Deleena24

    Pothead

  • VIP
  • 827 posts

Posted 08 January 2019 - 01:10 PM

Wow, these things are prolific! They grow like weeds.

I want to be able to print at least a dozen caps, but they're so fragile it's going to be difficult. The caps are paper thin. I also don't know when the spores start to drop. I might do a test sheet of caps in different stages to see when it's best to print.

Don't worry, if I can I will be donating a bunch to my fellow Topiates.

Attached Thumbnails

  • 20190108_115519.jpg
  • 20190108_115514.jpg
  • 20190108_115508.jpg
  • 20190108_115502.jpg

  • Samwise and AbnormalMortaL like this

#11 Deleena24

Deleena24

    Pothead

  • VIP
  • 827 posts

Posted 11 January 2019 - 11:40 PM

1st flush

Attached Thumbnails

  • 20190111_221639.jpg
  • 20190111_213049.jpg
  • 20190111_213054.jpg
  • 20190111_215053.jpg
  • 20190111_213034.jpg

  • Samwise and AbnormalMortaL like this

#12 Samwise

Samwise

    Mycophiliac

  • Free Member
  • 81 posts

Posted 12 January 2019 - 09:35 AM

What a fantastically bountiful and beautiful flush, you should be proud, great job!! May I ask you what environmental conditions you have going on in your Martha? Average temperature and humidity? I'm assuming you use a mister or humidifier, do you have it on a hydrotherm/thermostat controller or a timer...if the latter how long do you run it for, and how often? What do you do for FAE, do you fan, and if so for how long and how often? I want to replicate your conditions as best I can in my Martha for my own Mexicana grow. Many thanks, and happy growing.  :smile:


  • Deleena24 likes this

#13 Deleena24

Deleena24

    Pothead

  • VIP
  • 827 posts

Posted 12 January 2019 - 12:50 PM

Read though the whole thread bc the Martha evolves as I am trying to dial it in.

But I do it all by eye, so to speak. No sensors or whatever.

https://mycotopia.ne...k/#entry1391547

Once it's in the Martha it's set and forget, except for a misting every couple days to keep the casing really moist. Mexicanas like it really wet. Even with the casing 95%RH isn't too high.

Edited by Deleena24, 12 January 2019 - 12:53 PM.

  • Samwise likes this




Like Mycotopia? Become a member today!