Paradox
©
Fisana

Jump to content


Photo
- - - - -

Hepa Filter Depth- 12inch vs 6 inch- Any difference?


  • Please log in to reply
4 replies to this topic

#1 Severian

Severian

    Mycotopiate

  • VIP
  • 306 posts

Posted 08 September 2019 - 03:37 PM

I've been scrounging the threads regarding Flow hoods, specifically for more information surrounding the importance of the depth of a Hepa filter for a LFH,

 

Found a filter on ebay for 139+ free shipping, with dimensions 24x24x12,

 

 

I came across one thread here that I've now lost, that had a debate around whether or not the  12 inch depth vs the smaller 5 7/8 or 6 inches would impede laminar flow due to less resistance- but It didn't seem like there was any clear answer as to whether A, the 12 inch depth is undesireable, or B, if it didnt matter at all besides it taking up more physical space.

 

 

Does anyone have a concrete answer around this? 

 

Seems to me that I could justify a 60$+ discount for that extra 6 inches if that is the major difference between the two.

 

 

 

 



#2 TVCasualty

TVCasualty

    Embrace Your Damage

  • Moderator
  • 13,482 posts

Awards Bar:

Posted 08 September 2019 - 03:50 PM

The ratings of the filters matter more than their thickness. You need true-HEPA, which is 99.99% efficient at 0.3 microns.

 

A 12" thick filter sounds like it would be ULPA-rated, which is serious overkill for mycology and requires a bigger and more expensive blower to push air through it.



#3 Severian

Severian

    Mycotopiate

  • VIP
  • 306 posts

Posted 08 September 2019 - 04:48 PM

https://www.ebay.com...af0b3695478bc89

 

 

I'm finding that there seems to be an abundance of these 24x24x12's , and that their far cheaper than their 24x24x 6 counterparts- Both claiming the 99.99% at .3 microns.

 

 

 

Normally, bigger/more intense= more expensive- I don't know why that wouldn't apply in this case- unless like was stated in that thread I can't find, that the larger filters are actually using  the same amount of surface material stretched over a larger area, and so resistance is actually lessened.


Edited by Severian, 08 September 2019 - 05:00 PM.


#4 bezevo

bezevo

    Mycotopiate

  • Gold VIP
  • 889 posts

Awards Bar:

Posted 23 December 2019 - 07:30 PM

THE  filters i looked at on Amazon and ebay were 24"x24"x5.85"  or 24"x 30"x 5.85" they ran about  $130 to $300

i ended up ordering a 24"x 30"x 5.85" it was a bit over $200 with shipping seemed lik a bagain price wise ....but ....later after  ordered and paid for  they explained it was a special built to order  and kept delaying  making it .  so it turned into a  4 month wait ha

now got to wait for BIL wow is cabinet maker help me make box's and so on . blowers big enough to push that much air are $200 to  $300.

maybe  a Stamets  Series One not so pricey after all

 

https://www.amazon.c...62&sr=8-2-fkmr1

 

https://www.amazon.c...0A5GD069ZTCGH2A

 

THIS ONES GIGANTIC

https://www.amazon.c...X2B0T0C3QHNMGCP


Edited by bezevo, 23 December 2019 - 11:16 PM.


#5 clumsy

clumsy

    Mycophage

  • Gold VIP
  • 123 posts

Posted 23 December 2019 - 10:38 PM

See this post: https://mycotopia.ne...epa-air-source/






Like Mycotopia? Become a member today!