Paradox
©
Fisana

Jump to content


Photo
- - - - -

Hip makes syringes the Hillbilly way


  • Please log in to reply
20 replies to this topic

#1 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 17 February 2007 - 09:10 AM

open-faced is the way i fly.
http://mycotopia.net...57&d=1171696233
i've found it difficult to un-fold prints
when i'm wearing gloves and stuff is wet with lysol, etc.
tape makes that even worse.
the ziplocks one does not even need to open,
i just rip off the end, squirt in a few cc of sterile water
rub a little and draw it back up, now dark purple,
for dilution in more water for however many syringes needed.

Attached Thumbnails

  • attachment.php.jpg


#2 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 26 February 2007 - 09:14 AM

You are also using a whole print for a single syringe.

Please don't say "well you can water them down".

I know that, BUT I have not seen that mentioned in a single post about using the print in baggie method. The way they are all written, you use a whole print for a single syringe.


not so.
you do get a single syringe full of concentrated solution, true,
but here's a trick i learned from hillbilly -
make up a pint jar like one of his refill kits,
about 300 ml of water, sterilized in PC as usual,
twin silicon injection ports in the lid.
place airport thru one to keep air pressure equal.
take a fresh sterile syringe, draw up several cc of the water
inject your ziplock print, rub it all off, suck it back into syringe
then inject that back into the pint jar,
voila! enough spore solution to make 25-30 syringes.
if the print was light or small
just repeat process using additional prints into same jar
until desired concentration is reached.
:bow:

#3 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 26 February 2007 - 10:09 AM

cf. http://mycotopia.net...read.php?t=5001

#4 dial8

dial8

    3 Fungi Mod

  • Honorary Former Staff
  • 5,740 posts

Donator


Awards Bar:

Posted 26 February 2007 - 11:28 AM

I do like this a lot. Where can one acquire the itty bitty baggies?

#5 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 26 February 2007 - 11:31 AM

i get mine at the local head shop
but any craft store should carry them too.
of course regular sandwich-sized ones work ok too.

#6 golly

golly

    modapotato

  • Expired Member
  • 6,205 posts

Posted 26 February 2007 - 11:57 AM

I have a bunch of extras 8.... PM me if u want some...

#7 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 26 February 2007 - 06:54 PM

adding a few sample pix
that jar already has spores in it [note bottom first pic]
next time i make another
i'll try to snap a few pix of the process from print in baggie to jar

Attached Thumbnails

  • DSCN2004.jpg
  • DSCN2002.jpg
  • DSCN2001.jpg
  • DSCN2000.jpg


#8 loochypooch

loochypooch

    Heavy Metal Drummer

  • Expired Member
  • 719 posts

Posted 26 February 2007 - 08:07 PM

I never understood how the inside of the little baggy gets sterilized. Is it rubbed with alcohol prior to putting the print in it? Do they just come sterilized enough from the source?

#9 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 26 February 2007 - 08:11 PM

from the source,
high energy UV light, i think, is used
plus it's molded HOT.

i've used many, many
very damn few contams.

the foil squares themselves i cut, wrap in more foil
then pc like syringes, jars as normal.
un-wrap in glovebox for printing.

#10 mushit

mushit

    Shit Lover

  • OG VIP
  • 2,252 posts

Awards Bar:

Posted 26 February 2007 - 08:21 PM

I do like this a lot. Where can one acquire the itty bitty baggies?

Here is a good place:
http://www.uline.ca/...gs Poly Plastic

#11 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 26 February 2007 - 08:25 PM

btw
i spray the exterior of ziplocks
with Oust before opening them,
n front of flowhood [ r inside glovebox ]

#12 SWIM

SWIM

    Mycophage

  • Expired Member
  • 172 posts

Posted 26 February 2007 - 10:35 PM

I just print right on the inside of a fresh ziplock. Just about never had any contam issues that way. Not the prettiest prints, but quick and easy. I use snack size bags so I can get the shroom in.

#13 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 26 February 2007 - 10:51 PM

i've done that, too but they smear everywhere.

#14 Sidestreet

Sidestreet

    May your tracks be lost...

  • App Administrator
  • 8,629 posts

Donator


Awards Bar:

Posted 27 February 2007 - 09:05 AM

the foil squares themselves i cut, wrap in more foil
then pc like syringes, jars as normal.
un-wrap in glovebox for printing.


Nice. I was wondering about that...

#15 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 27 February 2007 - 11:07 AM

btw
since it takes awhile for me to use one of those jars up,
often the spores settle out and stick to the glass bottom.
of course shake well before use after storage
but even shaking often still leaves many spores in a film
so
neat trick,
tilt jar and fill syringe then you can 'fire' a jetstream
of the syringe-water at the exposed bottom of the jar to rinse the spore film off &
return all spores to the solution.
:bow:

#16 troutlips

troutlips

    VIP Moderator

  • Expired Member
  • 1,415 posts

Posted 27 February 2007 - 11:45 AM

I'm gonna have to try that!
Perhaps a little "sonification" would help after the spores settle out.
:greenboun

#17 Hillbilly

Hillbilly

    redneck

  • Expired Member
  • 772 posts

Posted 27 February 2007 - 11:50 AM

You're a fast learner Hippie.

#18 LotRev

LotRev

    Technopagan

  • Expired Member
  • 1,295 posts

Posted 27 February 2007 - 03:07 PM

http://mycotopia.net...57&d=1171696233

...and Hippie doesn't sell spores or syringes...

Nice Collection! :loveeyes:

#19 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 27 February 2007 - 03:16 PM

lol
that's waylit's picture, not mine.
:reb:
but i do give many away free.
:)
  • snapshot706 likes this

#20 Guest_lost_onabbey_rd_*

Guest_lost_onabbey_rd_*
  • Guest

Posted 27 February 2007 - 10:20 PM

nice hip.. that's how i've been doing it for while now
its so easy a cave man could do it
i got those same little bags at walmart
50 or 100 for $1
in the arts and craft sectioin next to the beads
lost




Like Mycotopia? Become a member today!