mescaline extraction log [pedro]
Posted 05 November 2007 - 11:54 PM
so my first mistake here was that i worked with glass jars..
HDPE is the way and i learned it the hard way hehe
anyway, glass jars with water..
then lab grade xylene..
then my syringe + pipette
[it helps to do pulls to reach the bottom of the jars if you dont have a sep. funnel]
after putting the lye in with the water and letting it dissolve, add the cacti powder
mix it very very well
- i put the cover of the jar inside a latex glove and closed the jar really tight. rolled and shook it until you see it mix up well
should end up like this
after a few hours you will notice the layers separating
the syringe+pipette at work
transfer the top layer into another container [glass or HPDE]
then in the water add a few drops of muriatic acid
when you pour in the water with HCL into the container with the xylene, make sure you mix it by SWIRLING not by shaking. this has given me cleaner results and was my mistake why i got dark brown crystals in my first pulls
after the water separates at the bottom, use a sep. funnel or a gadget like mine to pull it out and let it evap on a dish
*this is why i do not recommend glass anymore
- lye scratches the glass and causes it to crack and break
evap the dishes by fan & double boiler to make it faster
for the next pull
evaping and crystal pics:
i dont remember the yield anymore
i did not clean it any further
tested out 600mg of the dark dirty mesc and it was great
loved it except for the 2 hours of nausea in the beginning
still havent tried it again
Posted 06 November 2007 - 07:10 AM
My friends and I have had bad reactions to brown mescaline that wasn't acetone cleaned...I will never take brown mescaline again that isn't cleaned...once you clean it, you may find the nausea is reduced considerably, and you may feel like taking it again.
I took the acetone cleaned stuff over a dozen times, excellent experiences and no nausea at 300mg and less so far...but you couldn't pay me to take the non-cleaned stuff...
again, great work.
I use a glass carboy, no problems with lye etching but then again I add my lye to water seperately then add it to the caroby when it's good and mixed, never had a carboy break yet.
Posted 06 November 2007 - 07:38 AM
Posted 06 November 2007 - 07:46 AM
Posted 06 November 2007 - 08:00 AM
the latest addition to foaf's tek is an acetone wash at the end, this was added by ion years ago in his own thread.
It works wonders.
spreading your dose out by taking 100mg every 1/2 hour helps too. I have zero nausea, not even a hint with 300mg doses and less from acetone washed mescaline and spreading the dose out. Mescaline hits all the serotonin receptors, so nausea can be reduced by certain methods.
Posted 06 November 2007 - 08:22 AM
Posted 06 November 2007 - 05:51 PM
I can't find:cacti: the initial amounts of cacti powder....
Is it ok from sanpedro ?
Posted 07 November 2007 - 06:06 AM
i think i used a kilo of pedro powder..
im glad all the pictures helped lol
dont make my mistakes..
and about the wash, i might just do that some day..
Posted 07 November 2007 - 09:51 AM
- coleman318 likes this
Posted 07 November 2007 - 09:55 AM