Paradox
©
Fisana

Jump to content


Photo
- - - - -

Birthing Canal for Glove Box


  • Please log in to reply
7 replies to this topic

#1 Sunstar

Sunstar

    Gazer of the innerself

  • Expired Member
  • 2,031 posts

Posted 11 December 2007 - 10:08 AM

http://mycotopia.net...d=1197382275Has anyone ever designed a glove box that is normal in all regards cept it has an opening on one end of the box.
The seal in the bag would would act like a space chamber would work.You poke a hole in the closed end and tape one of the ends to the box
The lock stays shut near the box till all the materials were in the bag and the other seal tied. The bag of course would be spray with lysol or bleach water before the stuff would be put in there.
I have used this method for a long time and never had any problems with transfering things in and out and keeping it sterile at the same time.

Attached Thumbnails

  • gb.JPG


#2 Dank Side Of The Shroom

Dank Side Of The Shroom

    VIP Member

  • Expired Member
  • 3,447 posts

Posted 11 December 2007 - 10:10 AM

:cool:

#3 camMyco

camMyco

    Modified Honey

  • Expired Member
  • 2,027 posts

Posted 11 December 2007 - 10:29 AM

Look out fahtster, Sunstar is on the move! Looks good Sun!

#4 Hippie3

Hippie3

    DUNG DEALER

  • Founders
  • 40,642 posts

Posted 11 December 2007 - 11:19 AM

interesting way to get more room for a small box. :thumbup:

#5 PsychoDrogue

PsychoDrogue

    Mycotopiate

  • OG VIP
  • 2,258 posts

Posted 11 December 2007 - 12:59 PM

so you've made this or its just an idea? when connected is there any risk of large amounts of unclean air getting sucked threw the arm holes from the suction force of the bag opening?

ziplocks are sterile before use, are garbage bags as well? i see you clean yours, but if you never opened it before attaching it would it even be required?

#6 Sunstar

Sunstar

    Gazer of the innerself

  • Expired Member
  • 2,031 posts

Posted 11 December 2007 - 01:08 PM

Yes I made it.
Well you seal the lock by the glove box and stick spray nozzle in the other end of the bag{liquid not aersol} then tie that end and let it sit for 15 mins. You untie the end you just sprayed from and insert materials. close off that end with tie. open tie near glove box and move materials into GB. There is not much air in bag and none can get pulled in cause of the tie.
Yes the garbage bags are sterile to .I get them on a roll.

#7 fahtster

fahtster

    Oven bag specialist

  • OG VIP
  • 2,704 posts

Awards Bar:

Posted 11 December 2007 - 01:43 PM

Look out fahtster, Sunstar is on the move! Looks good Sun!


hehe... looks great SS. :) nice idea and thanks for sharing it! :thumbup:

fahtster

#8 Dipole

Dipole

    Legalize Cannabis

  • OG VIP
  • 3,389 posts

Donator


Awards Bar:

Posted 11 December 2007 - 01:52 PM

Cool airlock idea. I think "birth canal" is too PC, just call it a vagina.




Like Mycotopia? Become a member today!