Paradox
©
Fisana

Jump to content


Photo
- - - - -

Super Stealth iolite (I-INHALE) -Pictorial


  • Please log in to reply
13 replies to this topic

#1 mikey1two

mikey1two

    Mycophiliac

  • Expired Member
  • 26 posts

Posted 05 August 2009 - 10:24 PM

OK, everybody who knows anything about this vaporizer knows that it is pretty stealth.
Well I still thought that it looked awkward sucking on a walkie-talkie antenna, if you know what I mean. So I went ahead and made a custom case for it so it would look like an ordinary energy drink can.
This is my first pictorial, so I hope its clearly stated.
Here's how to make it
Materials needed:
Posted Image
-unopened 16oz Monster (or similar)
-Can opener (as pictured)
-Dremel with a cut off bit
Step One: Cutting the top off of the can.
With the can siting on a table, place the can opener on the top of the can positioning the blade to cut around the side of the can under the lip.
Posted Image
*Try not to apply too much pressure to the can opener's handle. Too much pressure will leave teeth marks on the lid.
Turn the knob while keeping the can opener pressed firmly on the top of the can.
Posted Image
Remove lid and place aside
Posted Image
Step Two: Drink your Monster
Pour it into a glass first, the sharp edges might cut your lip
Step Three: Making the vents
Cut a few vents in the can so that it can breath and won't heat up the can too much. This also stops the iolite from burning itself out by over heating.
Posted Image Posted Image
Try to make your vents on the lines of the can somewhere, here I cut the vents on the lines on the
"Supplement Facts" lines
Posted Image
in the Barcode
Posted Image
and on bottom
Posted Image
*notice how at quick glance you cant really see the slits!
Step Four: Making the hole for the mouth piece
This could be done one of two ways
First way looks real but doesn't hold that well when put all together
Pop the top of the can
Posted Image
Second way look a little suspicious but holds the top on better than the first way.
Drill a hole under the tab (it's better to have a top with a full tab to cover the hole)
Posted Image Posted Image
Step Five: Loading your iolite
Before you put your iolite into the can you have to fire it up and load it up
After you have done that go ahead and hold the top of the can and squeeze it gently
Posted Image
Try not to crease the can, you want the lid to fit back on correctly
Slowly work your iolite into the can while avoiding any hang ups on the vents that you cut
*Especially the on/off switch
Posted Image
Posted Image
Posted Image
Posted Image
attach the iolite stem
Posted Image
Step Six: Fitting the top
Here is where my invention could use a little modifying
if you went with the "Pop Top" just slip the top over the stem and sit it on the can
Posted Image Posted Image
this doesn't really hold the lid tight against the can and might pop off pretty easy
if you went with the "Hole Under The Tab" slip the stem through the hole and sit it on the the can
Posted Image
This holds the lid tighter against the can, preventing the lid from popping off easily.
Step seven: Vap Up!
remove the white part on the stem to make it look like a regular black straw in a Monster can.
Posted Image
walk down the street and enjoy!
PS
  • Beast likes this

#2 mikey1two

mikey1two

    Mycophiliac

  • Expired Member
  • 26 posts

Posted 05 August 2009 - 10:25 PM

Step Six : Fitting the top

I have an idea on a way to weigh down the top onto the can, but haven't done it yet

I am going to super glue some fishing line under the lid so that the two ends hang into the can.
on each end I will attach some kind of weight (fishing weight or a number of washers) and hang them on each side of the iolite inside the can. The heavier the weight the better it will hold!

If you do your can with the popped top, you could just loop the fishing line around the tab and then through the hole down into the can. that might be the better way to go (its more stealth)

Comments and ideas welcome!

PS

#3 Foster

Foster

    cyanophile

  • Honorary Former Staff
  • 2,254 posts

Awards Bar:

Posted 05 August 2009 - 11:06 PM

Nice write-up man. Cool idea too. Havent vaped in a while. How do you like the "iolite"? work well?

Cool stealthy idea. :)

#4 mikey1two

mikey1two

    Mycophiliac

  • Expired Member
  • 26 posts

Posted 06 August 2009 - 09:11 PM

Thanks, I guess not many people know about the iolite.

I only use it on occasions, it sneaks up on me. I guess because I don't get that nicotine rush and I just hit it till i feel it. When I do feel it its pretty strong. certainly not a one hitter smoking device!

Heading on a road trip and needed a more stealth way to vap in large crowds.

#5 growurown

growurown

    Mycotopiate

  • Expired Member
  • 209 posts

Posted 07 August 2009 - 08:12 PM

Thats a pretty slick way to smoke with no one noticeing. Even with the vents does the can heat up a bit still or does it stay pretty cool. Im not just talking about the outside but internal temp as welll. I was just wondering. Seems like a really good idea tho.

#6 mikey1two

mikey1two

    Mycophiliac

  • Expired Member
  • 26 posts

Posted 07 August 2009 - 08:18 PM

not sure of the temp inside, but the iolite is set at 180* or 190* so it shuts itself off when it gets too hot.
The iolite also cycles on and off, so the temp has to be dropping inside.
the can itself stays on the cool side to be honest. you have to think, when you hit the vap its causing neg pressure in the can therefor drawing in the cold air from outside to inside the can.

#7 ShroomGuerilla

ShroomGuerilla

    Myco-Monkey

  • Expired Member
  • 1,424 posts

Posted 12 August 2009 - 03:19 PM

that is very very sneaky.
:eusa_clap

#8 Mushrooms201

Mushrooms201

    Former Member

  • Banned Member
  • 561 posts

Posted 12 November 2009 - 01:43 PM

very nice idea, love the choice of energy drink also.

#9 shroom31

shroom31

    Mycotopiate

  • Free Member
  • 314 posts

Posted 15 November 2009 - 09:19 PM

what if u put some epoxy on the straw when the cap is on good and tight. That way the straw will stay in place when u put the straw into the vape. I dont know if it makes sense or not

#10 tenjin

tenjin

    dizzy with possibilities

  • Expired Member
  • 1,386 posts

Posted 15 November 2009 - 09:48 PM

Thats pretty cool way to hide it :bow: for crowds in public.
They are so nifty, would love to have a iolite, theyre pretty stealthy on their own anyway.

#11 Mushxmagik

Mushxmagik

    Tripindicular!!!!

  • Expired Member
  • 188 posts

Posted 15 November 2009 - 10:20 PM

Pretty sweet idea! they make stash cans that way too!

#12 libertaire

libertaire

    Former Member

  • Banned Member
  • 94 posts

Posted 15 November 2009 - 11:51 PM

Nice. It just looks like you're drinking a monster with a straw. That's sick!

#13 mikey1two

mikey1two

    Mycophiliac

  • Expired Member
  • 26 posts

Posted 21 November 2009 - 03:39 PM

shroom31 says " what if u put some epoxy on the straw when the cap is on good and tight. That way the straw will stay in place when u put the straw into the vape. I dont know if it makes sense or not"


Not a bad idea, will have to try that. Im on a smoking break right now, maybe when I start again!

#14 riseabovethought

riseabovethought

    innerspace explorer

  • App Administrator
  • 4,230 posts

Awards Bar:

Posted 18 December 2009 - 04:27 PM

I just ordered this iolite just because of this thread! Love the stealth invention!!




Like Mycotopia? Become a member today!