Super Stealth iolite (I-INHALE) -Pictorial
Posted 05 August 2009 - 10:24 PM
Well I still thought that it looked awkward sucking on a walkie-talkie antenna, if you know what I mean. So I went ahead and made a custom case for it so it would look like an ordinary energy drink can.
This is my first pictorial, so I hope its clearly stated.
Here's how to make it
-unopened 16oz Monster (or similar)
-Can opener (as pictured)
-Dremel with a cut off bit
Step One: Cutting the top off of the can.
With the can siting on a table, place the can opener on the top of the can positioning the blade to cut around the side of the can under the lip.
*Try not to apply too much pressure to the can opener's handle. Too much pressure will leave teeth marks on the lid.
Turn the knob while keeping the can opener pressed firmly on the top of the can.
Remove lid and place aside
Step Two: Drink your Monster
Pour it into a glass first, the sharp edges might cut your lip
Step Three: Making the vents
Cut a few vents in the can so that it can breath and won't heat up the can too much. This also stops the iolite from burning itself out by over heating.
Try to make your vents on the lines of the can somewhere, here I cut the vents on the lines on the
"Supplement Facts" lines
in the Barcode
and on bottom
*notice how at quick glance you cant really see the slits!
Step Four: Making the hole for the mouth piece
This could be done one of two ways
First way looks real but doesn't hold that well when put all together
Pop the top of the can
Second way look a little suspicious but holds the top on better than the first way.
Drill a hole under the tab (it's better to have a top with a full tab to cover the hole)
Step Five: Loading your iolite
Before you put your iolite into the can you have to fire it up and load it up
After you have done that go ahead and hold the top of the can and squeeze it gently
Try not to crease the can, you want the lid to fit back on correctly
Slowly work your iolite into the can while avoiding any hang ups on the vents that you cut
*Especially the on/off switch
attach the iolite stem
Step Six: Fitting the top
Here is where my invention could use a little modifying
if you went with the "Pop Top" just slip the top over the stem and sit it on the can
this doesn't really hold the lid tight against the can and might pop off pretty easy
if you went with the "Hole Under The Tab" slip the stem through the hole and sit it on the the can
This holds the lid tighter against the can, preventing the lid from popping off easily.
Step seven: Vap Up!
remove the white part on the stem to make it look like a regular black straw in a Monster can.
walk down the street and enjoy!
- Beast likes this
Posted 05 August 2009 - 10:25 PM
I have an idea on a way to weigh down the top onto the can, but haven't done it yet
I am going to super glue some fishing line under the lid so that the two ends hang into the can.
on each end I will attach some kind of weight (fishing weight or a number of washers) and hang them on each side of the iolite inside the can. The heavier the weight the better it will hold!
If you do your can with the popped top, you could just loop the fishing line around the tab and then through the hole down into the can. that might be the better way to go (its more stealth)
Comments and ideas welcome!
Posted 05 August 2009 - 11:06 PM
Cool stealthy idea. :)
Posted 06 August 2009 - 09:11 PM
I only use it on occasions, it sneaks up on me. I guess because I don't get that nicotine rush and I just hit it till i feel it. When I do feel it its pretty strong. certainly not a one hitter smoking device!
Heading on a road trip and needed a more stealth way to vap in large crowds.
Posted 07 August 2009 - 08:12 PM
Posted 07 August 2009 - 08:18 PM
The iolite also cycles on and off, so the temp has to be dropping inside.
the can itself stays on the cool side to be honest. you have to think, when you hit the vap its causing neg pressure in the can therefor drawing in the cold air from outside to inside the can.
Posted 12 November 2009 - 01:43 PM
Posted 15 November 2009 - 09:19 PM
Posted 15 November 2009 - 09:48 PM
They are so nifty, would love to have a iolite, theyre pretty stealthy on their own anyway.
Posted 15 November 2009 - 10:20 PM
Posted 15 November 2009 - 11:51 PM
Posted 21 November 2009 - 03:39 PM
Not a bad idea, will have to try that. Im on a smoking break right now, maybe when I start again!
Posted 18 December 2009 - 04:27 PM